Filter
Top Products
12 X4 ADSL Modem User’s Manual
a
aa
a
Check that the VPI, VCI, and Encapsulation settings
match those supplied by your service provider. (Refer to
the table on page 5 if necessary or consult your provider.)
b
bb
b
Enter the
User Name
and
Password
supplied by your
service provider.
c
cc
c
Optional: Enter a
Service Name
if your service provider
has given you one.
d
dd
d
Click
Save Changes
and then click
Write Settings to
Flash and Reboot
. Once the reboot is complete and the
unit has reset itself (when the front panel’s
LINK
light
remains on steady again), your X4 is ready to use. You
can open another Web browser or use the one that is
already open to access the Internet.
IMPORTANT:
Every time you make changes to the Basic Setup page,
you must click the
Save Changes
button and then the
Write Settings to Flash and Reboot
button. A
Confirm
page displays; click the button to complete the
process. If not, any changes will be lost when you
navigate to another page.