Filter
Top Products
44 X4 ADSL Modem User’s Manual
Using Your X4 with PlayStation
®
2
You should have already completed the Quick Start Instructions on
page 6.
Note:
You must plug the PlayStation unit into a computer to
configure it and you must use the X4’s Ethernet option.
Be sure to enter the login User Name and Password
supplied by your ISP on the X4’s
Basic Setup
page.
1
11
1
Navigate to the
Advanced Setup
page and click the
Virtual
Server
button. On the
Virtual Server
page, you need to
specify 11 entries, one at a time.
Tip:
If you are unfamiliar with
setting up a virtual server, please refer to page 22 of this
manual.
a
aa
a
Fill out the following fields:
Public Port=10070
Private Port=10070
Port Type=TCP
Host IP Address=10.0.0.50
and then click
Add This Setting
.
b
bb
b
You have to perform this task for ports 70 to 80. That is, the
next entry would be
Public Port=10071
Private Port=10071
Port Type=TCP
Host IP Address=10.0.0.50
and so on until you have entered
10080
.
Don’t forget to click
Add This Setting
each time.
c
cc
c
When you have entered all 11 entries, click
Write Settings to
Flash and Reboot
and then
Confirm
.
Important:
Once you are done, you must run the PlayStation
installation using the PS2 CD. Follow the prompts.