Filter
Top Products
20 X4 ADSL Modem User’s Manual
2.3 LAN Settings
By modifying your LAN ADSL setup and DHCP settings, you can
limit the number of DHCP addresses assigned by the X4. To
change your settings, from the
Advanced Setup
page click the
LAN Settings
button.
LAN IP Address
X4’s IP address. Default is 10.0.0.2.
Subnet Mask
X4’s subnet mask address. Default is
255.255.255.0.
DHCP Server
Enabled by default.
DHCP Address Pool
Selection
The DHCP Address Pool is based on
the X4’s LAN IP address plus 12 IP
addresses; for ex., if you are using the
X4’s default LAN IP address of 10.0.0.2,
the DHCP Address Pool would be
10.0.0.4-10.0.0.15. Default is System
Allocated. A pool of 253 (max.) user-
defined addresses is optional.
User Defined Start
Address
Starting address of LAN IP address
pool.
User Defined End Address
Ending address of LAN IP address pool.