Filter
Top Products
54 X4 ADSL Modem User’s Manual
5
55
5
Click
Save
and close the
Network
pane.
Linux TCP/IP Settings
The instructions for setting up boot-time DHCP vary dramatically
by distribution, so you may want to refer to your particular
version’s documentation.
Note:
If you have other network cards installed, you will need to
pick distinct Ethernet identifiers for each (eth0, eth1, eth2,
etc.). If you select an identifier other than eth0 for your
ADSL modem, use that identifier throughout.
For RedHat
For RedHatFor RedHat
For RedHat
Edit or create
/etc/sysconfig/network-scripts/ifcfg-eth0
so
that it contains the following three lines:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
If you want to use a static IP address—for example, if you were
setting up a virtual server (page 22) or a DMZ (page 25)—you
would edit or create
/etc/sysconfig/network-scripts/ifcfg-eth0
so that it contains the following lines:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static