ZyXEL Communications ADSL2+4 Modem User Manual


 
P-660H-T1v3s User’s Guide
131
CHAPTER 11
Static Route
11.1 Overview
The P-660H-T1v3s usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-660H-T1v3s send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-660H-
T1v3s’s LAN interface. The P-660H-T1v3s routes most traffic from A to the
Internet through the P-660H-T1v3s’s default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 50 Example of Static Routing Topology
11.1.1 What You Can Do in the Static Route Screens
Use the Static Route screens (Section 11.2 on page 132) to view and configure
IP static routes on the P-660H-T1v3s.
WAN
R1
R2
A
R3
LAN