Filter
Top Products
Chapter 17 System Settings
P-660H-T1v3s User’s Guide
172
17.2 The General Screen
Use this screen to configure system settings such as the system and domain
name, inactivity timeout interval and system password.
The System Name is for identification purposes. However, because some ISPs
check this name you should enter your computer's "Computer Name".
To find your computer in Windows XP, right-click over My Computer and select
Properties. Next, click the Computer Name tab.
In Windows 7, open your Start menu, right-click over the Computer item, and
select Properties.
Click Maintenance > System to open the General screen.
Figure 69 Maintenance > System > General
The following table describes the labels in this screen.
Table 51 Maintenance > System > General
LABEL DESCRIPTION
Admin
Password
Old
Password
Type the default password or the existing password you use to access the
system in this field.
New
Password
Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the P-
660H-T1v3s.
Retype to
confirm
Type the new password again for confirmation.