Filter
Top Products
Chapter 6 WAN Setup
P-660H-T1v3s User’s Guide
74
IP Address This option is available if you select Routing in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic
IP address; otherwise select Static IP Address and type your ISP
assigned IP address in the IP Address field below.
Subnet Mask This option is available if you select ENET ENCAP in the
Encapsulation field.
Enter a subnet mask in dotted decimal notation.
ENET ENCAP
Gateway
This option is available if you select ENET ENCAP in the
Encapsulation field.
Specify a gateway IP address (supplied by your ISP).
Connection (PPPoA and PPPoE encapsulation only.)
Keep Alive Select this when you want your connection up all the time. The P-
660H-T1v3s will try to bring up the connection automatically if it is
disconnected.
Connect on
Demand
Select this when you don't want the connection up all the time and
specify an idle time-out in the Max Idle Timeout field.
Max Idle
Timeout
Specify an idle time-out in this field when you select Connect on
Demand. The default setting is 0, which means the Internet session
will not timeout.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Advanced Setup Click this to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
Table 12 Network > WAN > Internet Access Setup (continued)
LABEL DESCRIPTION