Filter
Top Products
Chapter 6 WAN Setup
P-660H-T1v3s User’s Guide
75
6.2.1 Advanced Internet Access Setup
Use this screen to edit your P-660H-T1v3s's advanced WAN settings. Click the
Advanced Setup button in the Internet Access Setup screen. The screen
appears as shown.
Figure 23 Network > WAN > Internet Access Setup: Advanced Setup
The following table describes the labels in this screen.
Table 13 Network > WAN > Internet Access Setup: Advanced Setup
LABEL DESCRIPTION
RIP & Multicast
Setup
This section is not available when you configure the P-660H-T1v3s to
be in bridge mode.
RIP Direction RIP (Routing Information Protocol) allows a router to exchange
routing information with other routers. Use this field to control how
much routing information the P-660H-T1v3s sends and receives on
the subnet.
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version This field is not configurable if you select None in the RIP Direction
field.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.