Filter
Top Products
AES-100 User’s Guide
7-4 Bridge Commands
0
1
2
3
4
5
239.255.255.250
224.000.001.022
235.001.001.006
229.055.150.208
224.000.001.060
235.209.237.084
7f-ff-fa
00-01-16
01-01-06
37-96-d0
00-01-3c
51-ed-54
1, 2
1, 3, 4
1, 2, 5, 7,8
1, 9
1, 3, 5, 6
1, 4, 6, 9
Total 6 entries.
IGMP version 2
Query Received 343
Max Response Time 100 * 1/10 seconds
Query Interval 125 seconds
where
ID
The location of the entry in the multicast filtering database.
GDA
Group Destination Address. The IP address of a multicast group destination.
MAC
The last 3 bytes of the multicast MAC that the GDA is mapped to.
Member Ports
The ports that belong to this multicast group. 1= Ethernet, 2= ADSL port 1, 3=ADSL
port 2 and so on.
IGMP version
The version of IGMP being used in the network.
Query Received
The number of query packets received by the AES-100.
Max Response Time
The longest period of time used to respond to a query packet, measured in tenths of a
second.
Query Interval
The time period between query packets.
7.4.4 Filterage Command
Syntax:
192.168.1.1 bridge> filterage [age]
where
age =
aging out timer period in seconds.
This command sets or shows the aging out timer period of the filtering database. It is recommended that you use the
default setting. If the time interval is set too short, it could increase broadcast traffic and reduce the available
bandwidth.
7.4.5 Flush Command
Syntax:
192.168.1.1 bridge> flush [port]
where
port =
A bridge port number