ZyXEL Communications AES-100 Switch User Manual


 
AES-100 User’s Guide
Index C
Enable.................................................................7-2
Filter ...................................................................7-2
Status ..................................................................7-2
Management...........................................................1-2
Management Information Base (MIB).................11-2
margins...................................................................5-6
maximum attainable rate........................................5-6
MDF (Main Distribution Frame)............................2-4
Mfilter Command...................................................7-3
MTU.......................................................................1-3
Multiplexer.............................................................1-1
N
Network Interface Card..........................................2-1
NIC..................................See Network Interface Card
O
Operating Environment..........................................1-5
Operational mode..........................................5-9, 5-10
P
parity byte assignment............................................5-5
parity bytes per codeword ...................................... 5-5
Passwd Command ..................................................4-3
Password ..............................................................11-2
Physical Interfaces .................................................1-4
Physical Specifications...........................................1-4
Ping Command.....................................................10-2
Port-Based VLAN..................................................7-5
Portfilter Command................................................7-6
Power Consumption...............................................1-5
Profile.....................................................................5-1
PVID ......................................................................8-2
PVID Command.....................................................7-8
R
Rear Panel ..............................................................2-3
Rear Panel Connections
Connections ........................................................2-4
Rear Panel...........................................................2-3
Related Documentation............................................ xi
Remote Firmware Upload....................................13-1
Remote Management ........................................... 11-1
Restart Command................................................... 4-2
RFC 1213............................................................. 11-2
RFC 1215....................................................11-2, 11-3
RFC 1483............................................................... 3-1
RFC 1493............................................................. 11-2
S
Scalable.................................................................. 1-4
Secured Host ..........................................................4-4
Default................................................................ 3-2
Enable/Disable.................................................... 4-4
Set ..................................................... 11-2, 11-3, 11-4
Set Auto Command................................................6-1
Set Contact Command ...........................................4-3
Set Duplex Command ............................................ 6-1
Set Name Command .............................................. 4-3
Set Port Command ................................................. 5-9
Set Ports Command.............................................. 5-10
Set Profile Command............................................. 5-7
Set PVC Command .............................................. 5-11
Set PVCs Command............................................. 5-11
Set Speed Command .............................................. 6-1
Setting IP Address................................................10-1
Show Port Command ...........................................5-10
Show Ports Command.......................................... 5-10
Show Profile Command......................................... 5-8
Show Profiles Command .......................................5-9
Show PVC Command ...................................5-11, 7-2
Show PVCs command .........................................5-12
SHOWTIME .......................................................... 5-6
SNMP................................................ 11-1, 11-2, 11-3
Get ...........................................................11-2, 11-3
Manager............................................................ 11-2
Trap .................................................................. 11-2