Filter
Top Products
Chapter 18 SNMP
ES-1552 User’s Guide
109
The following table describes the labels in this screen.
18.2.2 SNMP Group: Modify
Click on the Group ID number or select a Group ID from the Group ID drop down list box
in the SNMP Group screen to modify the settings of an existing group.
Figure 61 SNMP Group: Modify
The following table describes the labels in this screen.
Table 42 SNMP Group: Create
LABEL DESCRIPTION
Group Name Specify the name for this SNMP group. You can use 1-33 any printable character.
Spaces are allowed.
SNMP Version Specify the SNMP version this group uses to manage the switch.
Authentication This field is only editable if you select SNMPv3 in the SNMP Version field. Select
Enabled to force SNMP v3 groups to authenticate with the switch or select Disabled
to deactivate authentication for the SNMP v3 groups. For SNMP v1 and SNMP v2c
authentication is always disabled.
Access Read - select Enabled to allow this group to collect information from this switch.
Write - select Enabled to allow this group to create or edit MIBs.
Create Click this to add this SNMP group to the switch.
Note: A maximum of ten groups can be created on the switch.
Cancel Click this to go back to the main SNMP Group screen without saving your changes.
Table 43 SNMP Group: Modify
LABEL DESCRIPTION
Group ID This field indicates which group you are modifying.
Click on Remove This Group to delete this group configuration from the switch.
Click on Display All Group to view the main SNMP Group screen.
Group Name Edit the name for this SNMP group.
SNMP Version Specify the SNMP version this group uses to manage the switch.
Authentication This field is only editable if you select SNMPv3 in the SNMP Version field. Select
Enabled to force SNMP v3 groups to authenticate with the switch or select Disabled
to deactivate authentication for the SNMP v3 groups. For SNMP v1 and SNMP v2c
authentication is always disabled.