Filter
Top Products
Chapter 19 RMON-Lite
ES-1552 User’s Guide
129
The following table describes the labels in this screen.
19.6 RMON Event: Overview
Use the RMON Event: Overview screen to view and delete event entries configured on the
switch. Select [9] Event from the RMON MIB Table: drop down listbox in the RMON-Lite
screen to view the screen as shown.
Figure 80 RMON Event: Overview.
Table 61 RMON Alarm: Create New Alarm
LABEL DESCRIPTION
RMON MIB
Table:
Use this drop down list box to select the MIB table you want to view. Click Apply to
refresh the screen to the selected MIB table view.
Index This field displays the index number of this alarm entry.
Interface Select the port which is monitored for this alarm.
Counter Select the data which is used to test if this alarm is triggered, the choices are Drop
Events, Octets, Packets and so on.
Sample Type Select the method of obtaining the sample value. Choices are Absolute and Value.
Startup Alarm Select the startup alarm type (Rising Threshold, Falling Threshold, Rising Or
Falling Threshold).
Rising
Threshold
Specify a rising threshold (between 0 and 2147483647). When a value is greater or
equal to this threshold, the probe triggers an alarm.
Falling
Threshold
Specify the falling threshold (between 0 and 2147483647). When a value is smaller
or equal to this threshold, the probe triggers an alarm.
Rising Event Select an index number of a rising event.
Falling Event Select an index number of a falling event.
Owner Enter a descriptive name of the application that creates this entry. You can use 1-64
printable ASCII characters. Spaces are not allowed.
Apply Click this to save the settings to the switch.
Alarm Overview Click this to go back to the RMON Alarm: Overview screen.