Filter
Top Products
ES-2108/ES-2108-G User’s Guide
Chapter 27 Introducing the Commands 155
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Configures a static MAC
address forwarding rule.
inactive
Disables a static MAC address
forwarding rule.
mirror-filter egress mac <mac-addr>
Sets port mirroring for the MAC
address on the outgoing traffic.
type
<all|dest|src>
Sets the direction of the
outgoing traffic for port
mirroring.
ingress mac <mac-addr>
Sets port mirroring for the MAC
address on the incoming traffic.
type
<all|dest|src>
Sets the direction of the
incoming traffic for port
mirroring.
mirror-port
Enables port mirroring.
<port-num>
Enables port mirroring on a
specified port.
mode zynos
Changes the CLI mode to the
ZyNOS format.
multi-login
Enables multi-login.
no bandwidth-control
Disable bandwidth control on
the switch.
cluster
Disables cluster management
on the switch.
cluster member <mac-address>
Removes the cluster member.
diffserv
Disables the DiffServ settings.
https timeout
Resets the session timeout to
the default of 300 seconds.
igmp-snooping
Disables IGMP snooping.
ip
Sets the management IP
address to the default value.
route <ip> <mask>
Removes a specified IP static
route.
route <ip> <mask>
inactive
Enables a specified IP static
route.
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
logins
Disables login access to the
specified name.
Table 58 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION