Filter
Top Products
ES-2108/ES-2108-G User’s Guide
Chapter 28 Command Examples 169
Figure 104 show mac address-table Command Example
28.3 ping
Syntax:
ping <ip> < [vlan <vlan-id> ] [ size <0-8024> ] [ -t ]>
where
This command sends Ping packets to an Ethernet device. The following example sends Ping
requests to and displays the replies from an Ethernet device with an IP address of
192.168.1.100.
Figure 105 ping Command Example
28.4 traceroute
Syntax:
traceroute <ip> [vlan <vlan-id>][ttl <1-255>] [wait <1-60>]
[queries <1-10>]
where
ras# show mac address-table all
Port VLAN ID MAC Address Type
2 1 00:85:a0:01:01:04 Dynamic
ras#
<ip>
= The IP address of an Ethernet device.
[vlan <vlan-id> ]
= Specifies the VLAN ID to which the Ethernet device belongs.
[size <0-8024> ]
= Specifies the packet size to send.
[ -t ]
= Sends Ping packets to the Ethernet device indefinitely. Click
[CTRL]+ C to terminate the Ping process.
ras# ping 192.168.1.100
sent rcvd rate rtt avg mdev max min reply from
1 1 100 0 0 0 0 0 192.168.1.100
2 2 100 0 0 0 0 0 192.168.1.100
3 3 100 0 0 0 0 0 192.168.1.100
ras#
<ip> =
The IP address of an Ethernet device.
[vlan <vlan-id> ] =
Specifies the VLAN ID to which the Ethernet device belongs.