Filter
Top Products
ES-2108/ES-2108-G User’s Guide
64 Chapter 7 Basic Setting
7.8 Port Setup
Click Basic Setting and then Port Setup in the navigation panel to enter the port
configuration screen.
VID Enter the VLAN identification number associated with the switch IP address. This is the
VLAN ID of the CPU and is used for management only. The default is "1". All ports, by
default, are fixed members of this "management VLAN" in order to manage the device
from any port. If a port is not a member of this VLAN, then users on that port cannot
access the device. To access the switch make sure the port that you are connected to is
a member of Management VLAN.
Apply Click Apply to save the settings.
Cancel Click Cancel to reset the fields to your previous configuration.
Management
IP Addresses
Configure the fields to set additional management IP address.
IP Address Enter the IP address for managing the switch by the members of the VLAN specified in
the VID field below.
IP Subnet
Mask
Enter the IP subnet mask in dotted decimal notation. For example, 255.255.255.0.
VID Enter the VLAN identification number.
Add Click Add to save the new rule to the switch. It then displays in the summary table at the
bottom of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Index This field displays the index number of an entry.
IP Address This field displays the management IP address of the switch.
Subnet Mask This field displays the subnet mask of the switch.
VID This field displays the VLAN identification number of the network.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
Table 11 IP Setup (continued)
LABEL DESCRIPTION