Filter
Top Products
Dimension ES-4024 Ethernet Switch
17-2 DHCP
Figure 17-1 DHCP
The following table describes the labels in this screen.
Table 17-1 DHCP
LABEL DESCRIPTION
Active Select this check box to enable the DHCP settings.
VID Enter the ID number of the VLAN group to which this DHCP settings apply.
DHCP Status Select Sever to set the ES-4024 to act as a DHCP server.
Select Relay to set the ES-4024 to act as a DHCP relay.
Then set the corresponding fields below.
Server
The fields are editable when you select Server in the DHCP Status field.
Client IP Pool
Starting Address
Specify the first of the contiguous addresses in the IP address pool.
Size of Client IP
Pool
Specify the size, or count of the IP address pool.
IP Subnet Mask Enter the subnet mask of the DHCP Server.
Default Gateway Enter the IP address of the default gateway device.