Filter
Top Products
Dimension ES-4024 Ethernet Switch
Introduction to CLI 35-7
Table 35-1 CLI Command Summary: sys
COMMAND DESCRIPTION
trustedHost <index>[<hostt>]
Sets or displays the SNMP trusted
host.
trapCommunity <index>
[<community>]
Sets or displays the SNMP Trap
community.
trapDest <index>[<destination>]
Sets or displays the SNMP trap
server.
disp <index|all>
Shows SNMP settings.
cluster active <name> <vid>
Enables this switch as the cluster
manager and assigns a cluster
name and VID in which the
manager belongs.
inactive <name> <vid>
Disables cluster management.
add <MAC addr> <password>
Adds a member switch into the
cluster using its web configurator
password.
remove <MAC addr>
Remove a member switch from the
cluster.
showMember
Shows details of member switches
in this cluster.
showCandidate
Shows a list of auto-discovered
potential cluster members.
status
Shows whether this switch is a
cluster member, cluster manager
or neither and information about
members in the cluster.
romreset
Resets the switch back to the
factory defaults.
35.2.2 sys sw Commands
The following commands are system switch commands; all are preceded with sys sw
Table 35-2 Command Summary: sys sw
COMMAND DESCRIPTION
driver config
Displays the switch NDIS
settings.
count disp
Shows the switch NDIS level
counters(CPU interface)
clear
Clears the switch NDIS level
counters(CPU interface)
garp status
Shows the GARP timer status.