Filter
Top Products
Dimension ES-4024 Ethernet Switch
VRRP 21-7
Table 21-3 VRRP Configuring: VRRP Parameters
LABEL DESCRIPTION
Priority Enter a number (between 1 and 254) to set the priority level. The bigger the number, the
higher the priority.
This field is 100 by default.
Uplink Gateway Enter the IP address of the uplink gateway in dotted decimal notation.
The ES checks the link to the uplink gateway.
Primary Virtual IP Enter the IP address of the primary virtual router in dotted decimal notation.
Secondary Virtual
IP
This field is optional. Enter the IP address of a secondary virtual router in dotted decimal
notation. This field is ignored when you enter 0.0.0.0.
Add Click Add to apply the changes.
Cancel Click Cancel to discard all changes made in this table.
Clear Click Clear to set the above fields back to the factory defaults.
21.4 VRRP Configuration Summary
To view a summary of all VRRP configurations on the ES, scroll down to the bottom of the VRRP Configuration
screen.
Figure 21-5 VRRP Configuration: Summary
The following table describes the labels in this screen.
Table 21-4 VRRP Configuring: VRRP Parameters
LABEL DESCRIPTION
Index This field displays the index number of an entry.
Active This field shows whether a VRRP entry is enabled (Yes) or disabled (No).
Name This field displays a descriptive name of an entry.
Network This field displays the IP address and subnet mask of an interface.
VRID This field displays the ID number of a virtual router.
Primary VIP This field displays the IP address of the primary virtual router.
Uplink Gateway This field displays the IP address of the uplink gateway.
Priority This field displays the priority level (1 to 255) of the entry.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.