Filter
Top Products
ZyXEL G-220F User’s Guide
Chapter 3 Wireless Station Mode Configuration 42
3.3.2.4 RADIUS
Configure IEEE 802.1x security with various authentication methods in this screen.
Figure 20 Station Mode: Security Settings: RADIUS
The following table describes the labels in this screen.
Table 10 Station Mode: Security Settings: RADIUS
LABEL DESCRIPTION
Authentication
Type
Select an authentication method from the drop down list. Options are EAP-TLS
and EAP-PEAP.
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Password This field is not available when you select EAP-TLS in the Authentication Type
field.
Enter the password associated with the user name above.
Certificate This field is only available when you select EAP-TLS in the Authentication Type
field.
Specify the location and name of a certificate in the Certificate field or click
Browse to locate it.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Browse This field is only available when you select EAP-TLS in the Authentication Type
field.
Click this button to display the Select Certificate screen, select a certificate and
click OK.
Validate Server
Certificate
Select the check box to check the certificate of the authentication server.
PEAP Inner EAP This field is only available when you select EAP-PEAP in the Authentication
Type field.
Use the drop-down list box to select a PEAP protocol. Options are MD5
CHALLENGE, TOKEN CARD and MS CHAP v2.
Save Click Save to save the changes back to the ZyXEL G-220F and display the Link
Info screen. Otherwise, click the close ( ) button to discard changes and go
back to the Site Survey screen.