Filter
Top Products
ZyXEL G-220F User’s Guide
Appendix B 64
Appendix B
Access Point Mode Setup Example
This example uses the network sharing feature in Windows 2000 to bridge the wired and
wireless network when you set the ZyXEL G-220F in access point (AP) mode.
Refer to Chapter 4, “Access Point Mode Configuration,” on page 50 for setup methods and
requirements.
Steps may vary depending on your Windows version. You may need to install additional
software in Windows 98 Second Edition and Windows ME.
Configuring the Computer on Which You Install the ZyXEL G-
220F
1 Refer to Section 1.7.1 “Change ZyXEL G-220F Mode” on page 23 to set the ZyXEL G-
220F to operate in AP mode.
2 Click Start, Settings, Network and Dial-up Connections (or click Start, Settings,
Control Panel and double-click Network and Dial-up Connections).
Figure 36 Windows 2000: Start
3 Right-click on the icon for your wired Ethernet adapter and click Properties.