Filter
Top Products
ZyXEL G-220F User’s Guide
Chapter 3 Wireless Station Mode Configuration 46
The following table describes the labels in this screen.
3 If you select Infrastructure network type in the first screen, select WEP, WPA-PSK,
WPA-RADIUS or RADIUS from the drop-down list box to enable data encryption. If
you select Ad-Hoc network type in the first screen, you can only use WEP encryption
method. Otherwise, select Disabled to allow the ZyXEL G-220F to communicate with
the access points or other peer wireless computers without any data encryption and skip
to step 5.
Figure 24 Station Mode: Profile: Wireless Settings
4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the ZyXEL G-220F. Refer to Section 3.3.2 on page 38 for detailed
information on wireless security configuration.
Table 13 Station Mode: Profile: Select a Channel
LABEL DESCRIPTION
Wireless Settings
Channel Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Wireless Mode Select Mixed Mode to have the ZyXEL G-220F connect to either an IEEE 802.11g
or IEEE 802.11b wireless device.
Select G-Only to have the ZyXEL G-220F connect to an IEEE 802.11g wireless
device only and vice versa.
Select B-Only to have the ZyXEL G-220F connect to an IEEE 802.11b wireless
device only and vice versa.