Filter
Top Products
Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
110
18.2.2 SNMP Group: Modify
Click on the Group ID number or select a Group ID from the Group ID drop
down list box in the SNMP Group screen to modify the settings of an existing
group.
Figure 63 SNMP Group: Modify
The following table describes the labels in this screen.
18.3 SNMP User
An SNMP user is an SNMP manager. SNMP managers must use the proper SNMP
user and group credentials to gain access to and manage agents such as the
Table 43 SNMP Group: Modify
LABEL DESCRIPTION
Group ID This field indicates which group you are modifying.
Click on Remove This Group to delete this group configuration from the
Switch.
Click on Display All Group to view the main SNMP Group screen.
Group Name Edit the name for this SNMP group.
SNMP Version Specify the SNMP version this group uses to manage the Switch.
Authenticatio
n
This field is only editable if you select SNMPv3 in the SNMP Version
field. Select Enabled to force SNMP v3 groups to authenticate with the
Switch or select Disabled to deactivate authentication for the SNMP v3
groups. For SNMP v1 and SNMP v2c authentication is always disabled.
Access Read - select Enabled to allow this group to collect information from this
Switch.
Write - select Enabled to allow this group to create or edit SNMP objects.
Apply Click this to save your settings to the Switch.