Filter
Top Products
Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
113
18.3.2 SNMP User: Modify
Click on the User ID number or select a User ID from the User ID drop down list
box in the SNMP User screen to modify the settings of an existing user.
Figure 66 SNMP User: Modify
The following table describes the labels in this screen.
Table 46 SNMP User: Modify
LABEL DESCRIPTION
User ID This field indicates which user you are modifying.
Click on Remove This User to delete this user configuration from the
Switch.
Click on Display All User to view the main SNMP User screen.
User Name Edit the name for this SNMP user.
Group Name Select the SNMP group this user should belong to.
SNMP Version Specify the SNMP version this group uses to manage the Switch.
Auth Type Authentication can only be configured for SNMP v3.
Select None to allow this user to manage the Switch without
authentication or select MD5 and configure the New Key field to force
this user to authenticate with the Switch.
Old Key Enter the old MD5 key this user used for authentication, if you are setting
up the key for the first time, leave this field blank.
New Key Enter the new MD5 key this user must use to authenticate with the
Switch.
Apply Click this to save your settings to the Switch.