Filter
Top Products
Chapter 4 The Web Configurator
GS-1524/GS-1548 User’s Guide
39
4.3.3 Change Your Password
After you log in for the first time, it is recommended you change the default
administrator password. Click System, Password to display the next screen.
Figure 19 Change Administrator Login Password
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click Apply to save your
changes back to the Switch.
Flash Logs Use this screen to configure logs which are saved to non-volatile
memory. These logs can be seen even after the Switch is rebooted.
SNMP Use these screens to configure SNMP management settings.
Engine ID Use this screen to configure SNMP engine ID.
Group Use this screen to configure groups with different access rights for SNMP
management.
User Use this screen to create users and assign them to pre-defined SNMP
groups.
Community Use this screen to define security parameters for SNMP v1 and SNMP
v2c.
Trap
Station
Use this screen to configure settings that define when notifications are
sent to an external management station.
RMON-Lite Use this screen to configure Remote Network Monitoring Management
Information Base (RMON MIB) settings.
Dynamic ARP Use these screens to enable and configure ARP table settings.
Settings Use this screen to configure ARP table settings.
ARP Entries Use this screen to enter and view MAC address to IP address mappings.
Logout Click this to logout of the web configurator.
Table 4 Navigation Panel Links (continued)
LINK DESCRIPTION