Filter
Top Products
Chapter 20 Dynamic ARP
GS-1524/GS-1548 User’s Guide
140
20.4 Adding ARP Table Entries
Click ADD in the Dynamic ARP > ARP Entries screen to open the Add Static
MAC-IP binding screen. Use this screen to add entries to the ARP table.
Figure 88 Viewing ARP Table Entries
The following table describes the labels in this screen.
Table 68 ARP Table
LABEL DESCRIPTION
MAC
Address
(XX-XX-XX-
XX-XX-XX)
Enter the MAC address in 6 pair hexadecimal format of the network device
you want to be allowed to communicate via the Switch. An example entry
of a MAC address is “0a-b1-c2-d3-e4-f5”.
IP Address Enter the corresponding IP address (in dotted decimal notation, ex
192.168.1.5) of the network device you want to be allowed to
communicate via the Switch.
VLAN ID Select the VLAN ID for this ARP entry.
Add Click this to save this entry to the ARP table and view the Dynamic ARP
screen.