Filter
Top Products
Chapter 5 System
GS-1524/GS-1548 User’s Guide
44
5.1.1 Configure IP Address
Use the Configure IP Address screen to set up the IP address manually. The
following screen appears when you click the existing IP address in the System >
Status screen.
Figure 22 Configure IP Address
The following table describes the labels in this screen.
IP Address This field indicates the IP address of the Switch.
You can click the existing IP address to change it. See Section 5.1.1 on
page 44.
Subnet Mask This field indicates the subnet mask of the Switch.
Gateway This field indicates the IP address of the default gateway.
L2 Table
Aging
This field displays whether the L2 Table Aging is enabled or disabled. Click
Enabled/Disabled to change the L2 Table Aging settings.
Backup
settings
Click this link to create and save a backup configuration file. See Section
5.1.3 on page 45.
Restore
settings
Click this link to upload an existing configuration file to the Switch. See
Section 5.1.4 on page 46.
Table 5 System (continued)
LABEL DESCRIPTION
Table 6 Configure IP Address
LABEL DESCRIPTION
IP Address Enter the IP address of your Switch in dotted decimal
notation. For example, 192.168.1.1.
Network Submask Enter the IP subnet mask of your Switch in dotted
decimal notation for example 255.255.255.0.
Gateway Enter the IP address of the default outgoing gateway in
dotted decimal notation, for example 192.168.1.5.