Filter
Top Products
Chapter 17 Event Logging
GS-1524/GS-1548 User’s Guide
98
17.2 Logging Screen
Use this screen to specify which system events should be recorded and where the
log messages should be saved. Click Logging > Settings in the navigation panel
to view the screen as shown.
Figure 54 Logging
The following table describes the labels in this screen.
Table 33 Logging
LABEL DESCRIPTION
Add Server Click this to configure a new syslog server.
Logging
Target
Click the RAM or Flash link to view the logs stored on the Switch.
Use the columns on the right to select the types of system events each
logging target should record. Select:
• Error - to record system failures, such as events which will cause the
Switch to malfunction and events such as invalid user input in the web
configurator.
• Warning - to record non critical errors on the Switch. The Switch will
continue to function when warnings are recorded.
• Info - to record regular system events, such as configuration changes
or logins.
• Debug - to record events which can be helpful for engineering
debugging of the Switch’s function. This field is not recommended to
track as it creates many messages not helpful to typical users.
For RAM and Flash logs, you can also hit Clear to delete all log entries.
For each Server log you configured you can hit Delete to remove this
syslog server from logging system events for the Switch.
Apply Click Apply to save your changes.