ZyXEL Communications GS-1524 / GS-1548 Switch User Manual


 
Chapter 8 VLAN
GS-1524/GS-1548 User’s Guide
59
The following table describes the labels in this screen.
8.2.2 Create IEEE 802.1Q VLAN Screen
See Section 8.1 on page 57 for more information on VLANs. Click VLAN in the
navigation panel to display the IEEE 802.1Q VLAN screen as shown next.
Figure 34 VLAN: Create VLAN
Table 12 VLAN: VLAN Status
LABEL DESCRIPTION
VLAN ID Select which VLAN you want to configure or click Create New VLAN to
go to the new VLAN configuration screen.
VLAN Status
Table
This table shows you the existing VLANs and their configurations.
VLAN ID Click on the VLAN ID to go to the VLAN edit screen.
Member Ports All the ports participating in the VLAN are listed here. The ports show up
in two different colors:
• (Orange) When the packet leaves this member port, the VLAN
tag is added.
• (Turquoise) When the packet leaves this member port, the
VLAN tag is removed.
Previous Page Click this button to view VLANs with lower identification numbers. This
field is only active if there are more VLANs than can be displayed on one
screen.
Next Page Click this button to view VLANs with higher identification numbers. This
field is only active if there are more VLANs than can be displayed on one
screen.