Filter
Top Products
Chapter 11 QoS
GS-1524/GS-1548 User’s Guide
76
The following table describes the labels in this screen.
Table 21 IP Address Based QoS
LABEL DESCRIPTION
Mode Select IP Address Based QoS to give higher or lower priority to packets
coming into the Switch from a specified source IP address.
Add Entry Enter the IP address and the subnet mask of the source whose traffic you
want to assign a priority to in the IP and MASK fields respectively. Select the
Priority value and click Add.
Change
Priority
Use these fields to edit existing IP address based QoS entries. Select the
index of an existing IP address based QoS entry. (This is the same value as
listed in the ID column of this screen.) Select the Priority you want to assign
to this entry. Click Change to view your changed settings.
Note: The changes are not applied until you click Apply Change
Settings.
ID, IP,
MASK,
Priority,
Delete
This is a summary table of your IP address based QoS settings. This table
updates when you click the Change button in this screen. Click DELETE in
the Delete column to remove this IP address based QoS entry from the
Switch.
Apply
Change
Settings
Click this when you have reviewed the changes you want to make and you
want to save them to the Switch’s memory.