Filter
Top Products
GS-2024 User’s Guide
Chapter 27 Introducing the Commands 183
Figure 104 CLI: write memory
Note: The write memory command is not available in User mode.
You must save your changes after each CLI session. All unsaved configuration
changes are lost once you restart the switch.
27.8.1 Logging Out
In User mode, enter the exit or logout command to log out of the CLI.
27.9 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User’s Guide for more background
information.
27.9.1 User Mode
The following table describes the commands available for User mode.
ras# write memory
Table 58 Command Summary: User Mode
COMMAND DESCRIPTION
help
Displays help information.
logout
Exits from the CLI.
exit
Logs out from the CLI.
history
Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
enable
Accesses Enable (or privileged) mode. See Section 27.9.2
on page 184.
show ip
Displays IP related information.
hardware-monitor <C|F>
Displays current hardware monitor information with the
specified temperature unit (Celsius C or Fahrenheit F).
system-information
Displays general system information.
mirror
Displays port mirroring information.
ping <IP|host-name>
Sends Ping request to an Ethernet device.