Filter
Top Products
GS-2024 User’s Guide
60 Chapter 6 System Status and Port Statistics
Figure 23 Status
The following table describes the labels in this screen.
Table 6 Status
LABEL DESCRIPTION
System up Time This field shows how long the system has been running since the last time it was
started.
Port This identifies the Ethernet port. Click a port number to display the Port Details
screen (refer to Figure 24 on page 62).
Link This field displays the speed (either 100M for 100Mbps or 1000M for 1000Mbps) and
the duplex (F for full duplex or H for half duplex).
State This field displays the STP (Spanning Tree Protocol) state of the port. See the
chapter on STP for details on STP states.
LACP This fields displays whether LACP (Link Aggregation Control Protocol) has been
enabled on the port.
TxPkts This field shows the number of transmitted frames on this port.
RxPkts This field shows the number of received frames on this port.
Errors This field shows the number of received errors on this port.