Filter
Top Products
GS-2024 User’s Guide
208 Chapter 28 Command Examples
Figure 115 CLI: Reset to the Factory Default Example
28.7 no Command Examples
These are the commonly used command examples that belong to the no group of commands.
28.7.1 no mirror
Syntax:
no mirror
Disables port mirroring on the switch.
An example is shown next.
Figure 116 no mirror Command Example
28.7.2 no https timeout
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
Figure 117 no https timeout Command Example
ras# erase running-config
ras# write memory
ras# write memory 2
ras(config)# no mirror
ras(config)# no https timeout
Cache timeout 300