Filter
Top Products
GS-2024 User’s Guide
Chapter 27 Introducing the Commands 199
27.9.6 mvr Commands
The following table lists the mvr commands in configuration mode.
Table 63 mvr Commands
COMMAND DESCRIPTION
mvr <1-4094>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
source-port <port-
list>
Sets the source port(s).
An MVR source port can send
and receive multicast traffic in a
multicast VLAN
receiver-port <port-
list>
Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN
inactive
Disables MVR settings.
mode
<dynamic|compatible>
Sets the MVR mode (dynamic
or
compatible).
name <name-str>
Sets the MVR name for
identification purposes.
tagged <port-list>
Sets the port(s) to tag VLAN
tags.
group <name-str>
start-address <ip>
end-address <ip>
Sets the multicast group range
for the MVR.
exit
Exist from the MVR
configuration mode.
no source-port
<port-list>
Disables the source port(s).
An MVR source port can send
and receive multicast traffic in a
multicast VLAN
no receiver-port
<port-list>
Disables the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN
no tagged <port-
list>
Sets the port(s) to untag VLAN
tags.
no inactive
Enables MVR.
no group
Disables all MVR group
settings.
no group <name-str>
Disables the specified MVR
group setting.