Filter
Top Products
GS-2024 User’s Guide
Chapter 28 Command Examples 215
An example is shown next. Enable Weighted Round Robin queuing on the switch and set the
queue weights from Q0 to Q3.
Figure 128 queuing-method wrr Command Example
28.8.9 egress set
Syntax:
egress set <port-list>
where
An example is shown next.
• Enable port-based VLAN tagging on the switch.
• Enable ports one, three, four and five for configuration.
• Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
Figure 129 egress set Command Example
28.8.10 qos priority
Syntax:
qos priority <0 .. 7>
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the IEEE 802.1p quality of service priority as four (4).
ras# configure
ras(config)# queuing-method wrr 4 3 2 1
<port-list>
Sets the outgoing traffic port list for a port-based VLAN.
ras(config)# vlan-type port-based
ras(config)# interface port-channel 1,3-5
ras(config-interface)# egress set 0,7-9
<0 .. 7>
Sets the quality of service priority for a port.