Filter
Top Products
GS-2024 User’s Guide
Chapter 27 Introducing the Commands 187
27.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
boot config <index>
Restarts the system with the specified
configuration file.
reload config <index>
Restarts the system and use the specified
configuration file.
write memory
Saves current configuration to the
configuration file the switch is currently
using.
<index>
Saves current configuration to the
specified configuration file on the switch.
ping <ip|host-name>
Sends Ping request to an Ethernet
device.
[vlan <vlan-
id>][..]
Sends Ping request to an Ethernet device
in the specified VLAN(s).
help
Displays command help information.
traceroute <ip|host-name> [in-
band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
help
Displays command help information.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
[command </>]
Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
Table 59 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 60 Command Summary: Configuration Mode
COMMAND DESCRIPTION
help
Displays help information.
logout
Exits from the CLI.
history
Displays a list of previous
command(s) that you have
executed.
exit
Exits from the CLI.
mode zynos
Changes the CLI mode to the
ZyNOS format.
password
Change the password for
Enable mode.