Filter
Top Products
GS-2024 User’s Guide
184 Chapter 27 Introducing the Commands
27.9.2 Enable Mode
The following table describes the commands available for Enable mode.
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the specified
VLAN(s) with the specified parameters.
help
Displays command help information.
traceroute <ip|host-name>
Determines the path a packet takes to a device.
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a VLAN.
help
Displays command help information.
ssh <1|2> <[user@]dest-ip>
Connects to an SSH server with the specified SSH version.
Table 58 Command Summary: User Mode (continued)
COMMAND DESCRIPTION
Table 59 Command Summary: Enable Mode
COMMAND DESCRIPTION
help
Displays help information.
logout
Exits Enable (or privileged) mode.
exit
Exits Enable (or privileged) mode.
history
Displays a list of command(s) that you
have previously executed.
enable
Accesses Enable (or privileged) mode.
disable
Exits Enable (or privileged) mode.
configure
Accesses Configuration mode. See
Section 27.9.3 on page 187.
no logging
Disables syslog logging.
show ip
Displays IP related information.
arp
Displays the ARP table.
route
Displays IP routing information.
route static
Displays IP static route information.
hardware-monitor
<C|F>
Displays current hardware monitor
information with the specified temperature
unit (Celsius C or Fahrenheit F).
system-information
Displays general system information.
vlan1q gvrp
Displays GVRP settings.
spanning-tree config
Displays Spanning Tree Protocol (STP)
settings.