Filter
Top Products
GS-2024 User’s Guide
188 Chapter 27 Introducing the Commands
no ip
Sets the management IP
address to the default value.
route <ip> <mask>
Removes a specified IP static
route.
route <ip> <mask>
inactive
Enables a specified IP static
route.
igmp-filtering
Clears the IGMP filtering
settings on the switch.
profile <name>
Deletes the IGMP filtering
profile.
profile <name>
start-address
<ip> end-address
<ip>
Deletes a rule in the IGMP
filtering profile.
igmp-snooping
Disables IGMP snooping on the
switch.
mac-forward mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
mirror
Disables port mirroring on the
switch.
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
trunk <T1|T2|T3|T4>
Disables the specified trunk
group.
<T1|T2|T3|T4>
lacp
Disables LACP in the specified
trunk group.
<T1|T2|T3|T4>
interface <port-
list>
Removes ports from the
specified trunk group.
bandwidth-control
Disable bandwidth control on
the switch.
vlan1q gvrp
Disables GVRP on the switch.
diffserv
Disables the DiffServ settings.
spanning-tree
Disables STP.
<port-list>
Disables STP on listed ports.
timesync
Disables timeserver settings.
Table 60 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION