ZyXEL Communications GS-4024 Switch User Manual


 
Chapter 28 OSPF
GS-4012F/4024 User’s Guide
231
Figure 121 OSPF Router Election Example
You can assign a priority to an interface which determines whether this router will be elected
to be a DR or BDR. The router with the highest priority becomes the DR, while a router with a
priority of 0 does not participate in router elections. In Figure 121 on page 231 you can assign
a priority of 0 to routers B and C, thereby ensuring they do not become DR or BDR and assign
a priority of 1 to router A to make sure that it does become the DR.
28.1.5 Configuring OSPF
To configure OSPF on the Switch, do the following tasks
1 Enable OSPF
2 Create OSPF areas
3 Create and associate interface(s) to an area
4 Create virtual links to maintain backbone connectivity.
28.2 OSPF Status
Use this screen to view current OSPF status. Click IP Application, OSPF in the navigation
panel to display the screen as shown next. See Section 28.1 on page 229 for more information
on OSPF.