Filter
Top Products
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
352
log-buffer logs Resets the maximum number of
syslog messages the Switch can
send to the syslog server in one
batch to the default value (4).
13
vlan <vlan-
list>
Disables ARP inspection on the
specified VLAN(s).
13
vlan <vlan-
list> logging
Disables logging of messages
generated by ARP inspection for
the specified VLAN(s).
13
bandwidth-control Disable bandwidth control on the
Switch.
13
bcp-transparency Disables Bridge Control Protocol
Transparency
13
classifier <name> Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use policy rule related
information.
13
<name> inactive Enables a classifier. 13
cluster Disables cluster management on
the Switch.
13
member <mac-
address>
Removes the cluster member. 13
dhcp relay Disables DHCP relay. 13
information Disables the relay agent
information option 82.
13
option System name is not appended to
option 82 information field.
13
dhcp server <vlan-
id>
Disables DHCP server settings. 13
default-gateway Disables DHCP server default
gateway settings.
13
primary-dns Disables DHCP primary DNS
server settings.
13
secondary-dns Disables DHCP server
secondary DNS settings.
13
dhcp smart relay Disables global DHCP relay
settings.
13
information Disables the relay agent
information option 82 for global
dhcp settings.
13
option System name is not appended to
option 82 information field for
global dhcp settings..
13
dhcp snooping Disables DHCP Snooping on the
Switch.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE