Filter
Top Products
Chapter 48 Interface Commands
GS-4012F/4024 User’s Guide
396
where
An example is shown next.
• Enable ports 1, 3, 4 and 5 for configuration.
• Set the BPDU control to
tunnel, to forward BPDUs received on ports one, three, four
and five.
48.2.3 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set how many broadband packets the interface receives per second.
48.2.4 bandwidth-limit
The bandwidth-limit command enables bandwidth control on the Switch.
Syntax:
bandwidth-limit
bandwidth-limit pir <Kbps>
bandwidth-limit cir <Kbps>
bandwidth-limit egress <Kbps>
<peer|tunnel|discard|
network>
=Type peer to process any BPDUs received on these ports.
Type
tunnel to forward BPDUs received on these ports.
Type
discard to drop any BPDUs received on these ports.
Type
network to process a BPDU with no VLAN tag and
forward a tagged BPDU.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#
broadcast-limit
= Enables broadcast storm control limit on the Switch.
<pkt/s>
= Limits how many broadcast packet the interface receives per
second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21