ZyXEL Communications GS-4024 Switch User Manual


 
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
362
area <area-id>
virtual-link
<router-id>
message-digest-
key <keyid> md5
<key>
Enables MD5 authentication and
sets the key ID and key for the
virtual link in the area.
13
area <area-id>
virtual-link
<router-id>
name <name>
Sets a descriptive name for the
virtual link for identification
purposes.
13
exit Leaves the router OSPF
configuration mode.
13
network <ip-
addr/bits> area
<area-id>
Creates an OSPF area. 13
no area <area-
id>
Removes the specified area. 13
no area <area-
id>
authentication
Sets the area to use no
authentication (None).
13
no area <area-
id> default-
cost
Sets the area to use the default
cost (15).
13
no area <area-
id> stub
Disables stub network settings in
the area.
13
no area <area-
id> stub no-
summary
Sets the area to send LSAs (Link
State Advertisements).
13
no area <area-
id> virtual-
link <router-
id>
authentication-
key
Resets the authentication
settings on this virtual link.
13
no area <area-
id> virtual-
link <router-
id> message-
digest-key
Resets the authentication
settings on this virtual link.
13
no area <area-
id> virtual-
link <router-
id>
authentication-
same-as-area
Resets the authentication
settings on this virtual area.
13
no area <area-
id> virtual-
link <router-
id>
Deletes the virtual link from the
area.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE