Filter
Top Products
P-662H/HW-D Series User’s Guide
132 Chapter 7 Wireless LAN
7.5.4 WPA(2) Authentication Screen
In order to configure and enable WPA(2) Authentication; click the Wireless LAN link under
Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.
Figure 66 Wireless: WPA(2)
Group Key Update
Timer (In
Seconds)
The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK
key management) or RADIUS server (if using WPA(2) key management) sends a
new group key out to all clients. The re-keying process is the WPA(2) equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the Group Key Update Timer is also supported in
WPA(2)-PSK mode. The ZyXEL Device default is 1800 seconds (30 minutes).
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced Setup Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
Table 40 Wireless: WPA(2)-PSK
LABEL DESCRIPTION