Filter
Top Products
P-662H/HW-D Series User’s Guide
150 Chapter 7 Wireless LAN
7.10.2 Multiple SSID Example
This example shows how to configure a guest wireless network with the following parameters.
In the following script example all typed commands and parameters have been bolded.
Table 50 Multiple SSID Example Configuration
PARAMETER VALUE
SSID guestnetwork
Security 64-bit WEP key encryption.
WEP key abcde
Other Intranet blocking is enabled, so that guests only have access to the Internet
and cannot access the local network.
ras> wlan mssid guestssid guestnetwork
Note: the wireless connection will be disconnected temporarily!!!
ras> wlan mssid mode 1 1
Note: the wireless connection will be disconnected temporarily!!!
Enable GuestSSID
GuestSSID with Intranet Blocking
TFTP Client Start
ras> wlan mssid setprivacy type 1
Privacy Setting is WEP64
Note: the wireless connection will be disconnected temporarily!!!
TFTP Client Start
ras> wlan mssid setprivacy wepkey 1 abcde
Note: the wireless connection will be disconnected temporarily!!!
TFTP Client Start
ras> wlan mssid show
Multiple SSID Settings :
==Major SSID Settings ==
Major SSID = "Wireless"
Major SSID privacy setting is WPA
==Guest SSID Settings ==
Guest SSID = Enable
Guest SSID = "guestnetwork"
Guest SSID privacy setting is WEP 64
WEP default key ID = 1
WEP key 1 = abcde
WEP key 2 =
WEP key 3 =
WEP key 4 =
Intranet Blocking = 1
Guest SSID AutoOff = Disable
Guest SSID AutoOff Timeout = 0 (minutes)
ras>