ZyXEL Communications 660H Series Network Router User Manual


 
Prestige 660H/HW Series User’s Guide
Chapter 30 Enabling the Firewall 284
CHAPTER 30
Enabling the Firewall
This chapter shows you how to get started with the Prestige firewall.
30.1 Remote Management and the Firewall
When SMT menu 24.11 is configured to allow management (see Chapter 37 on page 338) and
the firewall is enabled:
The firewall blocks remote management from the WAN unless you configure a firewall
rule to allow it.
The firewall allows remote management from the LAN.
30.2 Access Methods
The web configurator is, by far, the most comprehensive firewall configuration tool your
Prestige has to offer. For this reason, it is recommended that you configure your firewall using
the web configurator, see the following chapters for instructions. SMT screens allow you to
activate the firewall and view firewall logs.
30.3 Enabling the Firewall
From the main menu enter 21 to go to Menu 21 - Filter Set and Firewall Configuration to
display the screen shown next.
Enter option 2 in this menu to bring up the following screen. Press [SPACE BAR] and then
[ENTER] to select Yes in the Active field to activate the firewall. The firewall must be active
to protect against Denial of Service (DoS) attacks. Additional rules may be configured using
the web configurator.