Filter
Top Products
Prestige 660H/HW Series User’s Guide
357 Chapter 40 Internal SPTGEN
40.2.1 Internal SPTGEN File Modification - Important Points to
Remember
Each parameter you enter must be preceded by one “=”sign and one space.
Some parameters are dependent on others. For example, if you disable the Configured field in
menu 1 (see
Figure 237 on page 356), then you disable every field in this menu.
If you enter a parameter that is invalid in the Input column, the Prestige will not save the
configuration and the command line will display the Field Identification Number.
Figure
238 on page 357, shown next, is an example of what the Prestige displays if you enter a value
other than “0” or “1” in the Input column of Field Identification Number 1000000 (refer
to
Figure 237 on page 356).
Figure 238 Invalid Parameter Entered: Command Line Example
field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
The Prestige will display the following if you enter parameter(s) that are valid.
Figure 239 Valid Parameter Entered: Command Line Example
Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
40.3 Internal SPTGEN FTP Download Example
1 Launch your FTP application.
2 Enter "bin". The command “bin” sets the transfer mode to binary.
3 Get "rom-t" file. The command “get” transfers files from the Prestige to your computer.
The name “
rom-t” is the configuration filename on the Prestige.
4 Edit the "rom-t" file using a text editor (do not use a word processor). You must leave
this FTP screen to edit.