Filter
Top Products
Prestige 794M User’s Guide
Chapter 2 The Web Configurator 30
The following table describes the labels in this screen.
2.7 Routing Table
The routing table contains the route information to the network(s) that the Prestige can reach.
The Prestige automatically updates the routing table with the RIP information received from
other Ethernet devices.
Click Status and Routing Table in the navigation panel to display the Routing Table screen.
Figure 10 Status: Routing Table
The following table describes the labels in this screen.
Table 4 Status: ARP Table
LABEL DESCRIPTION
IP Address This is the learned IP address of a device connected to a switch port with
corresponding MAC address below.
MAC Address This is the MAC address of the device with corresponding IP address above.
Interface This is the interface name on the Prestige to which a device is connected.
Static This shows whether the MAC address is dynamic (learned by the Prestige) or
static (manually entered).
Table 5 Status: Routing Table
LABEL DESCRIPTION
Routing Table
Valid This field indicates whether a routing status is successful.
Destination This field displays the IP address of a destination network.
Netmask This field displays the subnet mask of a destination network.
Gateway/Interface This field displays the IP address of a gateway or the interface name on the
Prestige this route uses.
Cost This field displays the cost (or hope count) for this route.
RIP Routing Table
Destination This field displays the IP address of a destination network.
Netmask This field displays the subnet mask of a destination network.