Filter
Top Products
Prestige 794M User’s Guide
Chapter 2 The Web Configurator 36
Click Quick Start in the navigation panel to display the screen as shown.
Figure 18 Quick Start
The following table describes the labels in this screen.
Table 12 Quick Start
LABEL DESCRIPTION
Connection
Encapsulation Select the connection type from the drop-down list.
Click Auto Scan to have the Prestige automatically detect and select the
connection type. Refer to
Section 2.8.1 on page 37 for more information.
VCI Enter the VCI number.
VPI Enter the VPI number.
NAT Select Enable to allow more than one computer behind the Prestige to access the
Internet.
Select Disable to allow only one user to access the Internet or if computer(s)
behind the Prestige is provided with a public IP address(es).
Optional Settings
IP Address Enter the IP address (in dotted decimal notation) If you are provided with a static
public IP address.
Otherwise, enter 0.0.0.0 if your ISP provides you with a dynamic IP address.
Subnet Mask Enter the subnet mask (in dotted decimal notation) associated with the static IP
address above.
Default Gateway Enter the IP address of the default gateway.
DNS
Primary/
Secondary DNS
If provided by your ISP, enter the IP address(es) of the DNS server(s).
PPP Set the fields below if you select PPPoA or PPPoE in the Encapsulation field.
above.