Filter
Top Products
Prestige 794M User’s Guide
81 Chapter 7 VPN
7.2.2.2 LAN to LAN Connection
Use the PPTP LAN to LAN screen to configure the Prestige to accept connection requests
from a VPN client.
Figure 57 VPN: PPTP: LAN to LAN Connection
The following table describes the labels in this screen.
Idle Time Specify the time interval in minutes (where there is no traffic between the Prestige
and the computer) that can elapse before the Prestige automatically disconnects
the connection.
Enter 0 to allow connection up all the time.
Apply Click Apply to save the changes.
Table 41 VPN: PPTP: Remote Access (continued)
LABEL DESCRIPTION
Table 42 VPN PPTP: LAN to LAN Connection
LABEL DESCRIPTION
Connection Name Enter a descriptive name for identification purposes.
Type Select Dial Out if you want your Prestige to operate as a client (connecting to a
remote VPN device).
Select Dial In to allow computers to establish a VPN connection to the Prestige.
When configuring your Prestige as a client, enter the remote Server IP Address
(or Hostname) you wish to connection to.
When configuring your router as a server, enter the Private IP Address Assigned
to Dial in User address.
Server IP
Address (or
Domain
Name)
This field is applicable when you select Dial Out in the Type field
Enter the IP address or the domain name of the remote VPN device.
Private IP
Address
Assigned to
Dialin User
This field is applicable when you select Dial In in the Type field.
Enter the IP address (in dotted decimal notation) to assign to the remote VPN
client that initiates the VPN connection. For example, 192.168.1.10.