Filter
Top Products
Chapter 17 Multicast Configuration
NetAtlas Workgroup User’s Guide
187
Figure 133 Multicast Configuration: MVR: Add MVLAN
2 Select Active to enable this multicast VLAN setting.
3 In the Name field, enter a descriptive name (up to 32 ASCII characters) for
identification purposes.
4 Specify a VLAN ID in the Multicast VLAN ID field. Enter a number between 1 and
4094.
5 In the 802.1p Priority field, select a priority level (0-7) with which the switch replaces
the priority in outgoing IGMP control packets (belonging to this multicast VLAN).
6 In the Mode field, select Dynamic to send IGMP reports to all MVR source ports in the
multicast VLAN. Select Compatible to set the switch not to send IGMP reports.
7 In the Source Port list box, select the MVR source port that sends and receives multicast
traffic.
8 In the Receiver Port list box, select the port(s) that only receives multicast traffic.
9 In the None list box, select the port(s) not to participate in MVR. No MVR multicast
traffic is sent or received on the port(s).
10 In the Tagging list box, select the port(s) to add the VLAN ID tag to all outgoing frames.
11 Click OK to save the settings and close this screen. Otherwise, click Cancel to discard
the settings and close this screen.
12 A screen displays showing the configuration result. Click Done to close the screen.
Figure 134 Multicast Configuration: MVR: Add MVLAN: Result