Filter
Top Products
Chapter 19 IP Configuration
NetAtlas Workgroup User’s Guide
206
Figure 152 IP Configuration: DHCP: Server: New
The following table describes the labels in this screen.
19.5.3 Configuring DHCP Relay
Configure DHCP relay on the switch if the DHCP clients and the DHCP server are not in the
same subnet. During the initial IP address leasing, the switch helps to relay network
information (such as the IP address and subnet mask) between a DHCP client and a DHCP
server. Once the DHCP client obtains an IP address and can connect to the network, network
information renewal is done between the DHCP client and the DHCP server without the help
of the switch.
Table 113 IP Configuration: DHCP: Server: New
LABEL DESCRIPTION
VID Enter the ID number of the VLAN group to which this DHCP settings apply.
Client IP Pool
Starting
Specify the first of the contiguous addresses in the IP address pool.
Size of Client
IP Pool
Specify the size, or count of the IP address pool.
IP Subnet
Mask
Enter the subnet mask of the DHCP server.
Default
Gateway
Enter the IP address of the default gateway device.
Primary/
Secondary
DNS Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
Apply Click Apply to save the changes and close this screen.
Cancel Click Cancel to discard all changes and close this screen.